If you live in Canada, or in most parts of the U.S., your home heating system is probably pretty important to you—especially during the colder months. There are many different ways to heat a home, one of which is a heat pump. You may have heard of heat pumps, but what exactly are they? Read on to learn all about this excellent option for keeping your home warm.
A heat pump not only helps your house stay warm in the winter—it helps keep things cool during the summer, too. And it does it all very economically. In cold weather, it sucks heat out of the air outside and transfers it to the inside of your home.
Unfortunately, because temperatures in Canada tend to drop pretty low in the winter, an air-source heat pump likely won’t work all year long. You would likely need to have some form of supplementary heat. However, it can still help keep your heating and cooling costs down through much of the year.
There are three types of heat pumps available:
Ground- and water-source heat pumps both require an extensive amount of coils running beneath the ground or through the water.
In Canada, the most common type of heat pump is the air-source variety.
Basically, a heat pump absorbs heat from one area (outside) and transfers it to another area (inside your house). It operates on the same principle as a refrigerator. Refrigerators extract the heat from inside the unit and expel it into your kitchen. In your home, a heat pump removes heat from the cold outside air and transfers it into your house. An added bonus is that this process can be reversed in the summertime; the hot air will be extracted from your house and transferred outside, leaving your house nice and cool.
All matter contains heat, even when it’s cold out. A heat pump extracts that heat, and transfers it to where it’s needed—inside your house. Unlike a furnace, it doesn’t need to burn fuel to create heat; it just needs a little electricity to power itself.
One very important bit of information with regard to heat pumps is that they can produce a great deal of heat when the temperature outside is above 4 degrees Celsius. Once it drops below that, both the efficiency and output capacity suffer. Because of this, most heat pumps in Canada are installed together with a secondary heat source, such as a natural gas forced air furnace or electric baseboard heaters. This type of system automatically switches to gas heat when the temperature reaches or falls below freezing.
Heat tends to move from a location with a high temperature to a location with a lower temperature. Heat pumps use a relatively small amount of energy to reverse that process. They draw heat out of a lower-temperature area and pump it into a higher-temperature area. Thus transferring heat from a heat source, such as the outdoor air, and into a heat receptacle, such as your home.
Heat pumps used in residential properties are usually what’s called split systems. They have an outdoor component, as well as an indoor component, connected through the wall.
A heat pump uses an outdoor fan to blow air from outside over a coil that extracts the heat. The extracted heat is then pumped, using an indoor fan, throughout your house.
One advantage of a heat pump over other types of heating systems is that if you also want air conditioning during hotter weather, you don’t have to install two separate systems. Heat pumps can heat and cool your home. They’re also very efficient, as they don’t use fuel to create heat. They simply transfer heat from one area to another, using very little electricity.
Sometimes you’ll need supplementary heat in areas where the temperature drops below a certain point. Natural Resources Canada has a great explanation of the thermal balance point at which supplementary heat will kick in.
Heat pumps are fairly high tech machines, involving electrical circuits, some moving parts, and high pressure refrigerant. It can be very dangerous for an untrained person to attempt installation or repairs, so be sure you contact only a qualified technician to perform any heat pump service.
Noise: Heat pumps shouldn’t be noisy. If there is noise coming from your heat pump, it could be due to loose fan belts, nuts, or bolts.
No heat: If there is no heat coming from the heat registers, first check your thermostat. Make sure it’s on “heat,” and set it 2 to 3 degrees above the temperature in the room. Also, check the power supply. If a circuit breaker has tripped, try resetting it. Or check for an on/off switch on the furnace to be sure it’s turned on.
Ice or frost on the outdoor unit: There could be a problem with the defrost mode, or it could be that the unit is low on refrigerant.
Steam is coming off the outdoor unit: Don’t worry. This is normal. Heat pumps have a defrost cycle that comes on regularly to remove any built up frost. As this warms up the outdoor coils, naturally you’ll see steam coming off of the unit. This shouldn’t last more than 5 minutes at a time.
Here’s a list of things to watch for:
If you aren’t a technician yourself, you shouldn’t attempt to do this kind of repair work. The fact that heat pumps can contain hazardous materials is another good reason to let a professional handle it. A chemical leak is serious business, and injuries can easily occur when dealing with a broken device.
ready for an online quote? Your time matters, and so does your stuff. Get a personalized home insurance quote in 5 minutes. That’s less time than it takes to wait in line for coffee.
Before you start, please review our Privacy Policy and Terms of Use for information relating to your personal information and privacy settings.
The first thing you should do is to change the filter regularly. The filter should be changed from once a month to every three months, depending on how often you use it.
Next, have the heat pump inspected. You should have a qualified technician perform an inspection regularly. When the unit is installed, the technician can tell you how often this should be done, but a good rule of thumb is once a year. The technician should:
If your unit is leaking refrigerant, it may need to be topped up. However, make sure that it doesn’t get topped up unnecessarily; too much refrigerant impairs the unit’s performance, and so refrigerant should only be added if there is a leak.
Natural Resources Canada says that the best time to service your unit is at the end of the cooling season, prior to the start of the next heating season.
Most experts say that a good quality heat pump should last from 15 to 20 years. Geo-thermal units can last even longer.
The main factor for all heat pumps, especially those located above ground, is proper maintenance. Blockages can impede the unit from being able to properly expel heat, for example, so make sure there are no plants growing near it and melt any ice that forms on the outdoor coil with warm water. You’ll also want to regularly change its air filters, keep the coils clean and tidy, and clean the fins on the outside of the unit to ensure it functions as it was designed to. You can clean the fins by spraying them with a garden hose and a soap solution.
If you’re getting your system serviced annually, modern heat pump systems can last 20 years or more.
Home insurance companies will want to know what type of heating system your home has, the type of fuel, and the age of the unit. Once a heat pump is nearing its life expectancy, there may be a concern that it stops working, or works less efficiently. If this happens in the middle of a Canadian winter, it could cause the water pipes in your home to freeze and burst. The amount of damage caused by burst pipes can be substantial. It’s in everybody’s best interest to make sure your heating system is in top operating condition at all times.
Whether or not an air conditioner or heat pump is better suited to your home will depend largely on the appliances already available on the property. The biggest advantage for a heat pump is that it’s built to both cool things down in the summer and raise the temperature come winter. But, if your house already has a built-in furnace, electric baseboard heaters or other devices in good working order, then it’s probably not worth splurging on another expensive machine that does more than you need.
Air conditioners, meanwhile, are only used for cooling, and typically work on just one room at a time. They are less expensive to purchase and install than a heat pump, however, and cost less on average to run and maintain overall. Thus, an air conditioner is an option well worth exploring if all you need is something to chill a room or two in your house during summer’s sweltering heat.
An easy way to estimate how much power you need in a heat pump is to go by the overall size of the property you want to install it in using a 600-650 square foot per ton ratio. If you live in a 2,000-square foot home, for example, you can simply divide that number by 650 for a result of 3.07, indicating that a 3-ton heat pump should be more than enough to keep your home temperate year-round. Of course, this assumes that your house is well-insulated.
Want to learn more? Visit our Getting to Know Your Home resource centre for the complete rundown on all your home's systems and features. Or, get an online quote in under 5 minutes and find out how affordable personalized home insurance can be.
About the expert: George Baral
George Baral has an MBA and a masters' degree in chemistry. He spent almost 35 years inspecting and evaluating heating and air conditioning systems before retiring. He obtained a California general contractor's license to start a company focusing on energy-efficient construction, became certified as a LEED AP and earned a NATE (North American Technical Excellence) certification, which provides advanced training for HVAC technicians.
Check out these related articles:
Get a personalized online home insurance quote in just 5 minutes and see how much money you can save by switching to Square One.
Even when you take precautions, accidents can happen. Home insurance is one way to protect your family against financial losses from accidents. And, home insurance can start from as little as $12/month.